The Professionals In PA - Disco - Audio - HI-FI and Lighting Equipment



Add to Cart:

Shure BLX14UK PG Wireless System For Guitarist

£255.00  £239.00
Save: 6% off

  • Manufactured by: Shure


The most accessible Shure Wireless Guitar System with simple setup and an intuitive interface for performance you can trust in.

What receiver comes with the PG Wireless Guitar System?

The PG Wireless Guitar System comes with the Analogue Wireless Receiver BLX4 that provides improved linearity and frequency response.

The receiver BLX is ready to perform right out of the box and is the clearest choice for performers who wish to unplug from the wire. It’s also available as rack mount, metal receiver and Dual Receiver.
How many musicians can use this system simultaneously?

Up to 12 compatible channels per group with group and channel scan for easy set-up.
Why internal antennas?

For ideal signal strength, antennas on a wireless system need to be set up in a certain way. The internal antennas on the BLX receiver are already set in this ideal way, offering up to 100 m operating range and optimal signal strength.

Additionally internal antennas cannot be broken during setup, use or transport.
Is the setup really that easy?

Yes, with one button you can start the group and channel scan, which gives you the best open frequency. Adjust the transmitter to the same channel and you’re ready to go.
What does “Linearity” mean?

The proportion between input signal of the transmitter and output signal of the receiver is always constant.

Entry point to professional Shure quality, ruggedness and sound.
WA302

Cable, instrument, 2.5 foot (.75 m)
4-pin mini connector (TA4F) to 1/4-inch connector

BLX1 Bodypack Transmitter

Power and battery status LED
Adjustable gain control
Quick and easy frequency matching
AA batteries (included) provide up to 14 hours of continuous use
100 m (300 ft.) operating range (line of sight)

Receiver BLX4

Up to 12 compatible systems (region dependent)
Microprocessor-controlled internal antenna diversity
One touch QuickScan locates the best open frequency
¼" and XLR audio outputs
Two color audio status indicator LED

Furnished Accessories

Swivel adapter, part number: 90F4046
Power supply PS23E
Thread adapter: 31B1856
System technical specifications

Compatible systems per frequency band (up to): 12
Selectable frequencies: Up to 150
Auto Setup Features: QuickScan : Finds group with most compatible frequencies and sets to best frequency
Audio Reference Companding: No
Included Antennas: BLX4, BLX88: Internal, BLX4R: Detachable
Antenna Options: No
Receiver Network Ability: No
PC Control: No
Rack Hardware: URT2 (not included), Rack mount brackets (only with rackable/BLX-R Sets)
Case: No
Transmitter Display: LED
Receiver Display: BLX4, BLX88: LED, BLX4R: High-resolution LCD screen
Battery, Endurance: 2AA, up to 14h
Environment: Small to medium stages

Further Technical Specs

Operating Range: 91 m ( line of sight - actual range depends on RF signal absorption, reflection and interference)
Available Frequencies: Between 524–865 MHz (available frequencies depend on applicable regulations in country where system used)
Audio Range: 50–15,000 Hz (dependent on microphone type)
Transmitter RF Output Power: 10 mW, typical (varies by region)
Audio Output Connector: XLR and 1/4" (6.3 mm) unbalanced Maximum Output Level: -27 dBV (XLR, mic level), -13 dBV (1/4")
Battery Life: Up to 14 hours
Dynamic Range: 100 dB A-weighted
System Distortion: 0.5% THD typical (ref. +/- 38 kHz deviation, 1 kHz tone)
Operating Temperature Range: -18°C (0°F) – +50°C (122°F)
Power Requirements: BLX1, BLX2: 2 AA alkaline or rechargeable batteries
BLX4: 12–18 V DC at 150 mA, supplied by external power supply

Component Specifications:
BLX4 Receiver

Output Impedance:
- XLR connector 200 Ω
- 6.35 mm (1/4") connector: 50 Ω
Audio Output Level Ref. ±33 kHz deviation with 1 kHz tone:
- XLR connector –27 dBV (into 100 kΩ load)
- 6.35 mm (1/4") connector –13 dBV (into 100 kΩ load)
RF Sensitivity: 105 dBm for 12 dB SINAD, typical
Image Rejection: >50 dB, typical
Dimensions: 40 mm X 188 mm X 103 mm (H x W x D)
Weight: 241 g
Housing: Molded ABS
Power Requirements: 12–15 V DC @ 160 mA, supplied by external power supply (tip positive)

BLX1 Bodypack Transmitter

Audio Input Level:
- gain max: -16 dBV maximum
- gain min (0 dB): +10 dBV maximum
Gain Adjustment Range: 26 dB
Input Impedance: 1 MΩ
RF Transmitter Output: 10 mW, typical, varies by region
Dimensions: 110 mm x 64 mm x 21 mm (H x W x D)
Weight: 75 g, without batteries
Housing: Molded ABS
Power Requirements: 2 LR6 AA batteries, 1.5 V, alkaline
Battery Life: up to 14 hours (alkaline)

This product was added to our catalog on Tuesday 21 October, 2014.

Your IP Address is: 54.92.160.119
Copyright © 2018 MCQ Entertainments LTD. Powered by Zen Cart • Design by Ocala Real Estate Appraisal